dmesg - AMD Phenom II X4 820

Return To AMD Phenom II X4 820 System Information

ahci 0000:00:11.0: irq 42 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 42
ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 42
ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 42
ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 42
ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 42
ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 42
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000c6e000, 90:fb:a6:8a:3c:2b, XID 0c100000 IRQ 43
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE145).
[drm] register mmio base: 0xFE8E0000
[drm] register mmio size: 131072
ATOM BIOS: CEDAR
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 3048800 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading CEDAR Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DVI-I-1
[drm]   HPD4
[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm]   VGA-1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm]    pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Console: switching to colour frame buffer device 160x64
usb 2-3: new high-speed USB device number 2 using ehci-pci
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata5.00: ATAPI: HL-DT-ST DVDRAM GH60N, UG00, max UDMA/100
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH60N     UG00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2800.051 MHz
Switching to clocksource tsc
usb 2-3: New USB device found, idVendor=1307, idProduct=0330
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Mass Storage Device
usb 2-3: Manufacturer: Generic   
usb 2-3: SerialNumber: 00000000000006
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 4-3: new low-speed USB device number 2 using ohci_hcd
usb 4-3: New USB device found, idVendor=04f2, idProduct=0760
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Keyboard
usb 4-3: Manufacturer: Chicony
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input2
hid-generic 0003:04F2:0760.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:12.0-3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input3
hid-generic 0003:04F2:0760.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:12.0-3/input1
usb 4-4: new low-speed USB device number 3 using ohci_hcd
usb 4-4: New USB device found, idVendor=046d, idProduct=c054
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB Optical Mouse
usb 4-4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input4
hid-generic 0003:046D:C054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-4/input0
scsi 6:0:0:0: Direct-Access     Generic  Compact Flash    0.00 PQ: 0 ANSI: 2
scsi 6:0:0:1: Direct-Access     Generic  SD/MMC           0.00 PQ: 0 ANSI: 2
scsi 6:0:0:2: Direct-Access     Generic  microSD          0.00 PQ: 0 ANSI: 2
scsi 6:0:0:3: Direct-Access     Generic  MS/MS-PRO        0.00 PQ: 0 ANSI: 2
scsi 6:0:0:4: Direct-Access     Generic  SM/xD-Picture    0.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:4: Attached scsi generic sg6 type 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:4: [sdf] Attached SCSI removable disk
usb 7-2: new full-speed USB device number 2 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0006/input/input5
logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[530]: starting version 175
microcode: CPU0: patch_level=0x01000086
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
MCE: In-kernel MCE decoding enabled.
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x41
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90010e90b00). heartbeat=60 sec (nowayout=0)
microcode: CPU0: new patch_level=0x010000db
microcode: CPU1: patch_level=0x01000086
microcode: CPU1: new patch_level=0x010000db
microcode: CPU2: patch_level=0x01000086
microcode: CPU2: new patch_level=0x010000db
microcode: CPU3: patch_level=0x01000086
microcode: CPU3: new patch_level=0x010000db
microcode: Microcode Update Driver: v2.00 , Peter Oruba
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
type=1400 audit(1374676275.606:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=726 comm="apparmor_parser"
type=1400 audit(1374676275.606:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
type=1400 audit(1374676275.606:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
type=1400 audit(1374676275.606:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
type=1400 audit(1374676275.606:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
type=1400 audit(1374676275.606:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (907) killed by TERM signal
type=1400 audit(1374676276.586:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=956 comm="apparmor_parser"
type=1400 audit(1374676276.586:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=956 comm="apparmor_parser"
type=1400 audit(1374676276.586:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=956 comm="apparmor_parser"
type=1400 audit(1374676276.634:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=959 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (1079) terminated with status 1
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bio: create slab  at 1
Adding 9764860k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:9764860k 
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 7-2: USB disconnect, device number 2
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1215.832 msecs
PM: late suspend of devices complete after 0.235 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.744 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.389 msecs
PM: early resume of devices complete after 0.093 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
Extended CMOS year: 2000
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 0 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7608.284 msecs
Restarting tasks ... done.
usb 4-3: USB disconnect, device number 2
usb 4-3: new low-speed USB device number 4 using ohci_hcd
usb 4-3: New USB device found, idVendor=04f2, idProduct=0760
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Keyboard
usb 4-3: Manufacturer: Chicony
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input12
hid-generic 0003:04F2:0760.0008: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:12.0-3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input13
hid-generic 0003:04F2:0760.0009: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:12.0-3/input1
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 3 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.000C: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.000C/input/input14
logitech-djdevice 0003:046D:C52B.000D: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
usb 7-2: USB disconnect, device number 3
usb 7-2: new full-speed USB device number 4 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0010: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0010/input/input15
logitech-djdevice 0003:046D:C52B.0011: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
usb 7-2: USB disconnect, device number 4
usb 7-2: new full-speed USB device number 5 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0014: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0014/input/input16
logitech-djdevice 0003:046D:C52B.0015: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
usb 7-2: USB disconnect, device number 5
usb 7-2: new full-speed USB device number 6 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0018: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0018/input/input17
logitech-djdevice 0003:046D:C52B.0019: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1263.865 msecs
PM: late suspend of devices complete after 0.222 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.792 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.469 msecs
PM: early resume of devices complete after 0.095 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7596.967 msecs
usb 7-2: USB disconnect, device number 6
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 7 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.001C: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.001C/input/input18
logitech-djdevice 0003:046D:C52B.001D: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
usb 7-2: USB disconnect, device number 7
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1160.214 msecs
PM: late suspend of devices complete after 0.213 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.497 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.424 msecs
PM: early resume of devices complete after 0.094 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7667.703 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 7-2: new full-speed USB device number 8 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0020: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0020/input/input19
logitech-djdevice 0003:046D:C52B.0021: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: anacron main process (3395) killed by TERM signal
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1195.516 msecs
PM: late suspend of devices complete after 0.220 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.158 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.398 msecs
PM: early resume of devices complete after 0.094 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7146.304 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: USB disconnect, device number 8
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i8042 aux 00:04: System wakeup disabled by ACPI
PM: suspend of devices complete after 1071.838 msecs
PM: late suspend of devices complete after 0.214 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.785 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 17
smpboot: CPU 2 is now offline
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 109.051 msecs
PM: early resume of devices complete after 0.095 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7608.335 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 9 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0024: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0024/input/input20
logitech-djdevice 0003:046D:C52B.0025: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
usb 7-2: USB disconnect, device number 9
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i8042 aux 00:04: System wakeup disabled by ACPI
PM: suspend of devices complete after 1055.918 msecs
PM: late suspend of devices complete after 0.216 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.791 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.384 msecs
PM: early resume of devices complete after 0.094 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7604.583 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 10 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0028: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0028/input/input21
logitech-djdevice 0003:046D:C52B.0029: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i8042 aux 00:04: System wakeup disabled by ACPI
PM: suspend of devices complete after 1059.843 msecs
PM: late suspend of devices complete after 0.224 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.774 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 109.914 msecs
PM: early resume of devices complete after 0.094 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
usb 7-2: reset full-speed USB device number 10 using ohci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7602.677 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i8042 aux 00:04: System wakeup disabled by ACPI
PM: suspend of devices complete after 1041.752 msecs
PM: late suspend of devices complete after 0.470 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 61.386 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 17
Broke affinity for irq 43
smpboot: CPU 2 is now offline
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.809 msecs
PM: early resume of devices complete after 0.332 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
r8169 0000:03:00.0 eth0: link down
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
r8169 0000:03:00.0 eth0: link up
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7496.694 msecs
Restarting tasks ... done.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i8042 aux 00:04: System wakeup disabled by ACPI
PM: suspend of devices complete after 1037.813 msecs
PM: late suspend of devices complete after 0.444 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 61.303 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 43
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 110.798 msecs
PM: early resume of devices complete after 0.322 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
r8169 0000:03:00.0 eth0: link down
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
r8169 0000:03:00.0 eth0: link up
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 6757.276 msecs
Restarting tasks ... done.
do_general_protection: 36 callbacks suppressed
traps: chromium-browse[8855] general protection ip:7fe127b16f94 sp:7fff38ba39e0 error:0 in libpthread-2.17.so[7fe127b0d000+18000]
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1211.908 msecs
PM: late suspend of devices complete after 0.221 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.790 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.372 msecs
PM: early resume of devices complete after 0.096 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7612.373 msecs
Restarting tasks ... done.
usb 4-3: USB disconnect, device number 4
usb 4-3: new low-speed USB device number 5 using ohci_hcd
usb 4-3: New USB device found, idVendor=04f2, idProduct=0760
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Keyboard
usb 4-3: Manufacturer: Chicony
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input22
hid-generic 0003:04F2:0760.002A: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:12.0-3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input23
hid-generic 0003:04F2:0760.002B: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:12.0-3/input1
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: USB disconnect, device number 10
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1060.483 msecs
PM: late suspend of devices complete after 0.213 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.202 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 17
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 110.023 msecs
PM: early resume of devices complete after 0.093 msecs
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
pcieport 0000:00:15.0: System wakeup disabled by ACPI
Extended CMOS year: 2000
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7604.389 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 11 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.002E: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.002E/input/input24
logitech-djdevice 0003:046D:C52B.002F: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1075.886 msecs
PM: late suspend of devices complete after 0.229 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.767 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.374 msecs
PM: early resume of devices complete after 0.095 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7654.164 msecs
usb 7-2: USB disconnect, device number 11
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 12 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0032: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0032/input/input25
logitech-djdevice 0003:046D:C52B.0033: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:04: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1203.845 msecs
PM: late suspend of devices complete after 0.221 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.786 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.453 msecs
PM: early resume of devices complete after 0.095 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
Extended CMOS year: 2000
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7612.115 msecs
Restarting tasks ... done.
usb 7-2: USB disconnect, device number 12
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 7-2: new full-speed USB device number 13 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0036: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0036/input/input26
logitech-djdevice 0003:046D:C52B.0037: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i8042 aux 00:04: System wakeup disabled by ACPI
PM: suspend of devices complete after 1050.541 msecs
PM: late suspend of devices complete after 0.231 msecs
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup enabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci_hcd 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 61.157 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 42
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
Extended CMOS year: 2000
LVT offset 0 assigned for vector 0xf9
microcode: CPU0: new patch_level=0x010000db
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000db
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000db
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000db
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci_hcd 0000:00:14.5: System wakeup disabled by ACPI
ohci_hcd 0000:00:16.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 108.575 msecs
PM: early resume of devices complete after 0.096 msecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
Extended CMOS year: 2000
[drm] probing gen 2 caps for device 1022:9603 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a03c2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a03c2c0c
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
usb 7-2: reset full-speed USB device number 13 using ohci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7594.858 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To AMD Phenom II X4 820 System Information